/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
 * Copyright (c) 2019, Joyent, Inc.
 * Copyright (c) 2011, 2018 by Delphix. All rights reserved.
 * Copyright (c) 2014 by Saso Kiselkov. All rights reserved.
 * Copyright 2017 Nexenta Systems, Inc.  All rights reserved.
 * Copyright (c) 2020, George Amanakis. All rights reserved.
 */

#ifndef	_SYS_ARC_IMPL_H
#define	_SYS_ARC_IMPL_H

#include <sys/arc.h>
#include <sys/multilist.h>

#ifdef __cplusplus
extern "C" {
#endif

/*
 * Note that buffers can be in one of 6 states:
 *	ARC_anon	- anonymous (discussed below)
 *	ARC_mru		- recently used, currently cached
 *	ARC_mru_ghost	- recently used, no longer in cache
 *	ARC_mfu		- frequently used, currently cached
 *	ARC_mfu_ghost	- frequently used, no longer in cache
 *	ARC_l2c_only	- exists in L2ARC but not other states
 * When there are no active references to the buffer, they are
 * are linked onto a list in one of these arc states.  These are
 * the only buffers that can be evicted or deleted.  Within each
 * state there are multiple lists, one for meta-data and one for
 * non-meta-data.  Meta-data (indirect blocks, blocks of dnodes,
 * etc.) is tracked separately so that it can be managed more
 * explicitly: favored over data, limited explicitly.
 *
 * Anonymous buffers are buffers that are not associated with
 * a DVA.  These are buffers that hold dirty block copies
 * before they are written to stable storage.  By definition,
 * they are "ref'd" and are considered part of arc_mru
 * that cannot be freed.  Generally, they will aquire a DVA
 * as they are written and migrate onto the arc_mru list.
 *
 * The ARC_l2c_only state is for buffers that are in the second
 * level ARC but no longer in any of the ARC_m* lists.  The second
 * level ARC itself may also contain buffers that are in any of
 * the ARC_m* states - meaning that a buffer can exist in two
 * places.  The reason for the ARC_l2c_only state is to keep the
 * buffer header in the hash table, so that reads that hit the
 * second level ARC benefit from these fast lookups.
 */

typedef struct arc_state {
	/*
	 * list of evictable buffers
	 */
	multilist_t *arcs_list[ARC_BUFC_NUMTYPES];
	/*
	 * total amount of evictable data in this state
	 */
	zfs_refcount_t arcs_esize[ARC_BUFC_NUMTYPES];
	/*
	 * total amount of data in this state; this includes: evictable,
	 * non-evictable, ARC_BUFC_DATA, and ARC_BUFC_METADATA.
	 */
	zfs_refcount_t arcs_size;
} arc_state_t;

typedef struct arc_callback arc_callback_t;

struct arc_callback {
	void			*acb_private;
	arc_read_done_func_t	*acb_done;
	arc_buf_t		*acb_buf;
	boolean_t		acb_encrypted;
	boolean_t		acb_compressed;
	boolean_t		acb_noauth;
	zbookmark_phys_t	acb_zb;
	zio_t			*acb_zio_dummy;
	zio_t			*acb_zio_head;
	arc_callback_t		*acb_next;
};

typedef struct arc_write_callback arc_write_callback_t;

struct arc_write_callback {
	void			*awcb_private;
	arc_write_done_func_t	*awcb_ready;
	arc_write_done_func_t	*awcb_children_ready;
	arc_write_done_func_t	*awcb_physdone;
	arc_write_done_func_t	*awcb_done;
	arc_buf_t		*awcb_buf;
};

/*
 * ARC buffers are separated into multiple structs as a memory saving measure:
 *   - Common fields struct, always defined, and embedded within it:
 *       - L2-only fields, always allocated but undefined when not in L2ARC
 *       - L1-only fields, only allocated when in L1ARC
 *
 *           Buffer in L1                     Buffer only in L2
 *    +------------------------+          +------------------------+
 *    | arc_buf_hdr_t          |          | arc_buf_hdr_t          |
 *    |                        |          |                        |
 *    |                        |          |                        |
 *    |                        |          |                        |
 *    +------------------------+          +------------------------+
 *    | l2arc_buf_hdr_t        |          | l2arc_buf_hdr_t        |
 *    | (undefined if L1-only) |          |                        |
 *    +------------------------+          +------------------------+
 *    | l1arc_buf_hdr_t        |
 *    |                        |
 *    |                        |
 *    |                        |
 *    |                        |
 *    +------------------------+
 *
 * Because it's possible for the L2ARC to become extremely large, we can wind
 * up eating a lot of memory in L2ARC buffer headers, so the size of a header
 * is minimized by only allocating the fields necessary for an L1-cached buffer
 * when a header is actually in the L1 cache. The sub-headers (l1arc_buf_hdr and
 * l2arc_buf_hdr) are embedded rather than allocated separately to save a couple
 * words in pointers. arc_hdr_realloc() is used to switch a header between
 * these two allocation states.
 */
typedef struct l1arc_buf_hdr {
	kmutex_t		b_freeze_lock;
	zio_cksum_t		*b_freeze_cksum;
#ifdef ZFS_DEBUG
	/*
	 * Used for debugging with kmem_flags - by allocating and freeing
	 * b_thawed when the buffer is thawed, we get a record of the stack
	 * trace that thawed it.
	 */
	void			*b_thawed;
#endif

	arc_buf_t		*b_buf;
	uint32_t		b_bufcnt;
	/* for waiting on writes to complete */
	kcondvar_t		b_cv;
	uint8_t			b_byteswap;

	/* protected by arc state mutex */
	arc_state_t		*b_state;
	multilist_node_t	b_arc_node;

	/* updated atomically */
	clock_t			b_arc_access;

	/* self protecting */
	zfs_refcount_t		b_refcnt;

	arc_callback_t		*b_acb;
	abd_t			*b_pabd;
} l1arc_buf_hdr_t;

typedef enum l2arc_dev_hdr_flags_t {
	L2ARC_DEV_HDR_EVICT_FIRST = (1 << 0)	/* mirror of l2ad_first */
} l2arc_dev_hdr_flags_t;

/*
 * Pointer used in persistent L2ARC (for pointing to log blocks).
 */
typedef struct l2arc_log_blkptr {
	/*
	 * Offset of log block within the device, in bytes
	 */
	uint64_t	lbp_daddr;
	/*
	 * Aligned payload size (in bytes) of the log block
	 */
	uint64_t	lbp_payload_asize;
	/*
	 * Offset in bytes of the first buffer in the payload
	 */
	uint64_t	lbp_payload_start;
	/*
	 * lbp_prop has the following format:
	 *	* logical size (in bytes)
	 *	* aligned (after compression) size (in bytes)
	 *	* compression algorithm (we always LZ4-compress l2arc logs)
	 *	* checksum algorithm (used for lbp_cksum)
	 */
	uint64_t	lbp_prop;
	zio_cksum_t	lbp_cksum;	/* checksum of log */
} l2arc_log_blkptr_t;

/*
 * The persistent L2ARC device header.
 * Byte order of magic determines whether 64-bit bswap of fields is necessary.
 */
typedef struct l2arc_dev_hdr_phys {
	uint64_t	dh_magic;	/* L2ARC_DEV_HDR_MAGIC */
	uint64_t	dh_version;	/* Persistent L2ARC version */

	/*
	 * Global L2ARC device state and metadata.
	 */
	uint64_t	dh_spa_guid;
	uint64_t	dh_vdev_guid;
	uint64_t	dh_log_entries;		/* mirror of l2ad_log_entries */
	uint64_t	dh_evict;		/* evicted offset in bytes */
	uint64_t	dh_flags;		/* l2arc_dev_hdr_flags_t */
	/*
	 * Used in zdb.c for determining if a log block is valid, in the same
	 * way that l2arc_rebuild() does.
	 */
	uint64_t	dh_start;		/* mirror of l2ad_start */
	uint64_t	dh_end;			/* mirror of l2ad_end */
	/*
	 * Start of log block chain. [0] -> newest log, [1] -> one older (used
	 * for initiating prefetch).
	 */
	l2arc_log_blkptr_t	dh_start_lbps[2];
	/*
	 * Aligned size of all log blocks as accounted by vdev_space_update().
	 */
	uint64_t	dh_lb_asize;		/* mirror of l2ad_lb_asize */
	uint64_t	dh_lb_count;		/* mirror of l2ad_lb_count */
	const uint64_t		dh_pad[32];	/* pad to 512 bytes */
	zio_eck_t		dh_tail;
} l2arc_dev_hdr_phys_t;
CTASSERT(sizeof (l2arc_dev_hdr_phys_t) == SPA_MINBLOCKSIZE);

/*
 * A single ARC buffer header entry in a l2arc_log_blk_phys_t.
 */
typedef struct l2arc_log_ent_phys {
	dva_t			le_dva;		/* dva of buffer */
	uint64_t		le_birth;	/* birth txg of buffer */
	/*
	 * le_prop has the following format:
	 *	* logical size (in bytes)
	 *	* physical (compressed) size (in bytes)
	 *	* compression algorithm
	 *	* object type (used to restore arc_buf_contents_t)
	 *	* protected status (used for encryption)
	 *	* prefetch status (used in l2arc_read_done())
	 */
	uint64_t		le_prop;
	uint64_t		le_daddr;	/* buf location on l2dev */
	/*
	 * We pad the size of each entry to a power of 2 so that the size of
	 * l2arc_log_blk_phys_t is power-of-2 aligned with SPA_MINBLOCKSHIFT,
	 * because of the L2ARC_SET_*SIZE macros.
	 */
	const uint64_t		le_pad[3];	/* pad to 64 bytes	 */
} l2arc_log_ent_phys_t;

#define	L2ARC_LOG_BLK_MAX_ENTRIES	(1022)

/*
 * A log block of up to 1022 ARC buffer log entries, chained into the
 * persistent L2ARC metadata linked list. Byte order of magic determines
 * whether 64-bit bswap of fields is necessary.
 */
typedef struct l2arc_log_blk_phys {
	uint64_t		lb_magic;	/* L2ARC_LOG_BLK_MAGIC */
	/*
	 * There are 2 chains (headed by dh_start_lbps[2]), and this field
	 * points back to the previous block in this chain. We alternate
	 * which chain we append to, so they are time-wise and offset-wise
	 * interleaved, but that is an optimization rather than for
	 * correctness.
	 */
	l2arc_log_blkptr_t	lb_prev_lbp;	/* pointer to prev log block */
	/*
	 * Pad header section to 128 bytes
	 */
	uint64_t		lb_pad[7];
	/* Payload */
	l2arc_log_ent_phys_t	lb_entries[L2ARC_LOG_BLK_MAX_ENTRIES];
} l2arc_log_blk_phys_t;				/* 64K total */
/*
 * The size of l2arc_log_blk_phys_t has to be power-of-2 aligned with
 * SPA_MINBLOCKSHIFT because of L2BLK_SET_*SIZE macros.
 */
CTASSERT(IS_P2ALIGNED(sizeof (l2arc_log_blk_phys_t),
    1ULL << SPA_MINBLOCKSHIFT));
CTASSERT(sizeof (l2arc_log_blk_phys_t) >= SPA_MINBLOCKSIZE);
CTASSERT(sizeof (l2arc_log_blk_phys_t) <= SPA_MAXBLOCKSIZE);

/*
 * These structures hold in-flight abd buffers for log blocks as they're being
 * written to the L2ARC device.
 */
typedef struct l2arc_lb_abd_buf {
	abd_t		*abd;
	list_node_t	node;
} l2arc_lb_abd_buf_t;

/*
 * These structures hold pointers to log blocks present on the L2ARC device.
 */
typedef struct l2arc_lb_ptr_buf {
	l2arc_log_blkptr_t	*lb_ptr;
	list_node_t		node;
} l2arc_lb_ptr_buf_t;

/* Macros for setting fields in le_prop and lbp_prop */
#define	L2BLK_GET_LSIZE(field)	\
	BF64_GET_SB((field), 0, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1)
#define	L2BLK_SET_LSIZE(field, x)	\
	BF64_SET_SB((field), 0, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1, x)
#define	L2BLK_GET_PSIZE(field)	\
	BF64_GET_SB((field), 16, SPA_PSIZEBITS, SPA_MINBLOCKSHIFT, 1)
#define	L2BLK_SET_PSIZE(field, x)	\
	BF64_SET_SB((field), 16, SPA_PSIZEBITS, SPA_MINBLOCKSHIFT, 1, x)
#define	L2BLK_GET_COMPRESS(field)	\
	BF64_GET((field), 32, SPA_COMPRESSBITS)
#define	L2BLK_SET_COMPRESS(field, x)	\
	BF64_SET((field), 32, SPA_COMPRESSBITS, x)
#define	L2BLK_GET_PREFETCH(field)	BF64_GET((field), 39, 1)
#define	L2BLK_SET_PREFETCH(field, x)	BF64_SET((field), 39, 1, x)
#define	L2BLK_GET_CHECKSUM(field)	BF64_GET((field), 40, 8)
#define	L2BLK_SET_CHECKSUM(field, x)	BF64_SET((field), 40, 8, x)
#define	L2BLK_GET_TYPE(field)		BF64_GET((field), 48, 8)
#define	L2BLK_SET_TYPE(field, x)	BF64_SET((field), 48, 8, x)
#define	L2BLK_GET_PROTECTED(field)	BF64_GET((field), 56, 1)
#define	L2BLK_SET_PROTECTED(field, x)	BF64_SET((field), 56, 1, x)

#define	PTR_SWAP(x, y)		\
	do {			\
		void *tmp = (x);\
		x = y;		\
		y = tmp;	\
		_NOTE(CONSTCOND)\
	} while (0)

#define	L2ARC_DEV_HDR_MAGIC	0x5a46534341434845LLU	/* ASCII: "ZFSCACHE" */
#define	L2ARC_LOG_BLK_MAGIC	0x4c4f47424c4b4844LLU	/* ASCII: "LOGBLKHD" */

/*
 * L2ARC Internals
 */
typedef struct l2arc_dev {
	vdev_t			*l2ad_vdev;	/* vdev */
	spa_t			*l2ad_spa;	/* spa */
	uint64_t		l2ad_hand;	/* next write location */
	uint64_t		l2ad_start;	/* first addr on device */
	uint64_t		l2ad_end;	/* last addr on device */
	boolean_t		l2ad_first;	/* first sweep through */
	boolean_t		l2ad_writing;	/* currently writing */
	kmutex_t		l2ad_mtx;	/* lock for buffer list */
	list_t			l2ad_buflist;	/* buffer list */
	list_node_t		l2ad_node;	/* device list node */
	zfs_refcount_t		l2ad_alloc;	/* allocated bytes */
	/*
	 * Persistence-related stuff
	 */
	l2arc_dev_hdr_phys_t	*l2ad_dev_hdr;	/* persistent device header */
	uint64_t		l2ad_dev_hdr_asize; /* aligned hdr size */
	l2arc_log_blk_phys_t	l2ad_log_blk;	/* currently open log block */
	int			l2ad_log_ent_idx; /* index into cur log blk */
	/* Number of bytes in current log block's payload */
	uint64_t		l2ad_log_blk_payload_asize;
	/*
	 * Offset (in bytes) of the first buffer in current log block's
	 * payload.
	 */
	uint64_t		l2ad_log_blk_payload_start;
	/* Flag indicating whether a rebuild is scheduled or is going on */
	boolean_t		l2ad_rebuild;
	boolean_t		l2ad_rebuild_cancel;
	boolean_t		l2ad_rebuild_began;
	uint64_t		l2ad_log_entries;   /* entries per log blk  */
	uint64_t		l2ad_evict;	 /* evicted offset in bytes */
	/* List of pointers to log blocks present in the L2ARC device */
	list_t			l2ad_lbptr_list;
	/*
	 * Aligned size of all log blocks as accounted by vdev_space_update().
	 */
	zfs_refcount_t		l2ad_lb_asize;
	/*
	 * Number of log blocks present on the device.
	 */
	zfs_refcount_t		l2ad_lb_count;
} l2arc_dev_t;

/*
 * Encrypted blocks will need to be stored encrypted on the L2ARC
 * disk as they appear in the main pool. In order for this to work we
 * need to pass around the encryption parameters so they can be used
 * to write data to the L2ARC. This struct is only defined in the
 * arc_buf_hdr_t if the L1 header is defined and has the ARC_FLAG_ENCRYPTED
 * flag set.
 */
typedef struct arc_buf_hdr_crypt {
	abd_t		*b_rabd;		/* raw encrypted data */
	dmu_object_type_t	b_ot;		/* object type */
	uint32_t		b_ebufcnt;	/* number or encryped buffers */

	/* dsobj for looking up encryption key for l2arc encryption */
	uint64_t		b_dsobj;	/* for looking up key */

	/* encryption parameters */
	uint8_t		b_salt[ZIO_DATA_SALT_LEN];
	uint8_t		b_iv[ZIO_DATA_IV_LEN];

	/*
	 * Technically this could be removed since we will always be able to
	 * get the mac from the bp when we need it. However, it is inconvenient
	 * for callers of arc code to have to pass a bp in all the time. This
	 * also allows us to assert that L2ARC data is properly encrypted to
	 * match the data in the main storage pool.
	 */
	uint8_t		b_mac[ZIO_DATA_MAC_LEN];
} arc_buf_hdr_crypt_t;

typedef struct l2arc_buf_hdr {
	/* protected by arc_buf_hdr mutex */
	l2arc_dev_t		*b_dev;		/* L2ARC device */
	uint64_t		b_daddr;	/* disk address, offset byte */

	list_node_t		b_l2node;
} l2arc_buf_hdr_t;

typedef struct l2arc_write_callback {
	l2arc_dev_t	*l2wcb_dev;		/* device info */
	arc_buf_hdr_t	*l2wcb_head;		/* head of write buflist */
	/* in-flight list of log blocks */
	list_t		l2wcb_abd_list;
} l2arc_write_callback_t;

struct arc_buf_hdr {
	/* protected by hash lock */
	dva_t			b_dva;
	uint64_t		b_birth;

	arc_buf_contents_t	b_type;
	arc_buf_hdr_t		*b_hash_next;
	arc_flags_t		b_flags;

	/*
	 * This field stores the size of the data buffer after
	 * compression, and is set in the arc's zio completion handlers.
	 * It is in units of SPA_MINBLOCKSIZE (e.g. 1 == 512 bytes).
	 *
	 * While the block pointers can store up to 32MB in their psize
	 * field, we can only store up to 32MB minus 512B. This is due
	 * to the bp using a bias of 1, whereas we use a bias of 0 (i.e.
	 * a field of zeros represents 512B in the bp). We can't use a
	 * bias of 1 since we need to reserve a psize of zero, here, to
	 * represent holes and embedded blocks.
	 *
	 * This isn't a problem in practice, since the maximum size of a
	 * buffer is limited to 16MB, so we never need to store 32MB in
	 * this field.
	 */
	uint16_t		b_psize;

	/*
	 * This field stores the size of the data buffer before
	 * compression, and cannot change once set. It is in units
	 * of SPA_MINBLOCKSIZE (e.g. 2 == 1024 bytes)
	 */
	uint16_t		b_lsize;	/* immutable */
	uint64_t		b_spa;		/* immutable */

	/* L2ARC fields. Undefined when not in L2ARC. */
	l2arc_buf_hdr_t		b_l2hdr;
	/* L1ARC fields. Undefined when in l2arc_only state */
	l1arc_buf_hdr_t		b_l1hdr;
	/*
	 * Encryption parameters. Defined only when ARC_FLAG_ENCRYPTED
	 * is set and the L1 header exists.
	 */
	arc_buf_hdr_crypt_t b_crypt_hdr;
};

typedef struct arc_stats {
	kstat_named_t arcstat_hits;
	kstat_named_t arcstat_misses;
	kstat_named_t arcstat_demand_data_hits;
	kstat_named_t arcstat_demand_data_misses;
	kstat_named_t arcstat_demand_metadata_hits;
	kstat_named_t arcstat_demand_metadata_misses;
	kstat_named_t arcstat_prefetch_data_hits;
	kstat_named_t arcstat_prefetch_data_misses;
	kstat_named_t arcstat_prefetch_metadata_hits;
	kstat_named_t arcstat_prefetch_metadata_misses;
	kstat_named_t arcstat_mru_hits;
	kstat_named_t arcstat_mru_ghost_hits;
	kstat_named_t arcstat_mfu_hits;
	kstat_named_t arcstat_mfu_ghost_hits;
	kstat_named_t arcstat_deleted;
	/*
	 * Number of buffers that could not be evicted because the hash lock
	 * was held by another thread.  The lock may not necessarily be held
	 * by something using the same buffer, since hash locks are shared
	 * by multiple buffers.
	 */
	kstat_named_t arcstat_mutex_miss;
	/*
	 * Number of buffers skipped when updating the access state due to the
	 * header having already been released after acquiring the hash lock.
	 */
	kstat_named_t arcstat_access_skip;
	/*
	 * Number of buffers skipped because they have I/O in progress, are
	 * indirect prefetch buffers that have not lived long enough, or are
	 * not from the spa we're trying to evict from.
	 */
	kstat_named_t arcstat_evict_skip;
	/*
	 * Number of times arc_evict_state() was unable to evict enough
	 * buffers to reach its target amount.
	 */
	kstat_named_t arcstat_evict_not_enough;
	kstat_named_t arcstat_evict_l2_cached;
	kstat_named_t arcstat_evict_l2_eligible;
	kstat_named_t arcstat_evict_l2_ineligible;
	kstat_named_t arcstat_evict_l2_skip;
	kstat_named_t arcstat_hash_elements;
	kstat_named_t arcstat_hash_elements_max;
	kstat_named_t arcstat_hash_collisions;
	kstat_named_t arcstat_hash_chains;
	kstat_named_t arcstat_hash_chain_max;
	kstat_named_t arcstat_p;
	kstat_named_t arcstat_c;
	kstat_named_t arcstat_c_min;
	kstat_named_t arcstat_c_max;
	/* Not updated directly; only synced in arc_kstat_update. */
	kstat_named_t arcstat_size;
	/*
	 * Number of compressed bytes stored in the arc_buf_hdr_t's b_pabd.
	 * Note that the compressed bytes may match the uncompressed bytes
	 * if the block is either not compressed or compressed arc is disabled.
	 */
	kstat_named_t arcstat_compressed_size;
	/*
	 * Uncompressed size of the data stored in b_pabd. If compressed
	 * arc is disabled then this value will be identical to the stat
	 * above.
	 */
	kstat_named_t arcstat_uncompressed_size;
	/*
	 * Number of bytes stored in all the arc_buf_t's. This is classified
	 * as "overhead" since this data is typically short-lived and will
	 * be evicted from the arc when it becomes unreferenced unless the
	 * zfs_keep_uncompressed_metadata or zfs_keep_uncompressed_level
	 * values have been set (see comment in dbuf.c for more information).
	 */
	kstat_named_t arcstat_overhead_size;
	/*
	 * Number of bytes consumed by internal ARC structures necessary
	 * for tracking purposes; these structures are not actually
	 * backed by ARC buffers. This includes arc_buf_hdr_t structures
	 * (allocated via arc_buf_hdr_t_full and arc_buf_hdr_t_l2only
	 * caches), and arc_buf_t structures (allocated via arc_buf_t
	 * cache).
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_hdr_size;
	/*
	 * Number of bytes consumed by ARC buffers of type equal to
	 * ARC_BUFC_DATA. This is generally consumed by buffers backing
	 * on disk user data (e.g. plain file contents).
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_data_size;
	/*
	 * Number of bytes consumed by ARC buffers of type equal to
	 * ARC_BUFC_METADATA. This is generally consumed by buffers
	 * backing on disk data that is used for internal ZFS
	 * structures (e.g. ZAP, dnode, indirect blocks, etc).
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_metadata_size;
	/*
	 * Number of bytes consumed by various buffers and structures
	 * not actually backed with ARC buffers. This includes bonus
	 * buffers (allocated directly via zio_buf_* functions),
	 * dmu_buf_impl_t structures (allocated via dmu_buf_impl_t
	 * cache), and dnode_t structures (allocated via dnode_t cache).
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_other_size;
	/*
	 * Total number of bytes consumed by ARC buffers residing in the
	 * arc_anon state. This includes *all* buffers in the arc_anon
	 * state; e.g. data, metadata, evictable, and unevictable buffers
	 * are all included in this value.
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_anon_size;
	/*
	 * Number of bytes consumed by ARC buffers that meet the
	 * following criteria: backing buffers of type ARC_BUFC_DATA,
	 * residing in the arc_anon state, and are eligible for eviction
	 * (e.g. have no outstanding holds on the buffer).
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_anon_evictable_data;
	/*
	 * Number of bytes consumed by ARC buffers that meet the
	 * following criteria: backing buffers of type ARC_BUFC_METADATA,
	 * residing in the arc_anon state, and are eligible for eviction
	 * (e.g. have no outstanding holds on the buffer).
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_anon_evictable_metadata;
	/*
	 * Total number of bytes consumed by ARC buffers residing in the
	 * arc_mru state. This includes *all* buffers in the arc_mru
	 * state; e.g. data, metadata, evictable, and unevictable buffers
	 * are all included in this value.
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_mru_size;
	/*
	 * Number of bytes consumed by ARC buffers that meet the
	 * following criteria: backing buffers of type ARC_BUFC_DATA,
	 * residing in the arc_mru state, and are eligible for eviction
	 * (e.g. have no outstanding holds on the buffer).
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_mru_evictable_data;
	/*
	 * Number of bytes consumed by ARC buffers that meet the
	 * following criteria: backing buffers of type ARC_BUFC_METADATA,
	 * residing in the arc_mru state, and are eligible for eviction
	 * (e.g. have no outstanding holds on the buffer).
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_mru_evictable_metadata;
	/*
	 * Total number of bytes that *would have been* consumed by ARC
	 * buffers in the arc_mru_ghost state. The key thing to note
	 * here, is the fact that this size doesn't actually indicate
	 * RAM consumption. The ghost lists only consist of headers and
	 * don't actually have ARC buffers linked off of these headers.
	 * Thus, *if* the headers had associated ARC buffers, these
	 * buffers *would have* consumed this number of bytes.
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_mru_ghost_size;
	/*
	 * Number of bytes that *would have been* consumed by ARC
	 * buffers that are eligible for eviction, of type
	 * ARC_BUFC_DATA, and linked off the arc_mru_ghost state.
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_mru_ghost_evictable_data;
	/*
	 * Number of bytes that *would have been* consumed by ARC
	 * buffers that are eligible for eviction, of type
	 * ARC_BUFC_METADATA, and linked off the arc_mru_ghost state.
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_mru_ghost_evictable_metadata;
	/*
	 * Total number of bytes consumed by ARC buffers residing in the
	 * arc_mfu state. This includes *all* buffers in the arc_mfu
	 * state; e.g. data, metadata, evictable, and unevictable buffers
	 * are all included in this value.
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_mfu_size;
	/*
	 * Number of bytes consumed by ARC buffers that are eligible for
	 * eviction, of type ARC_BUFC_DATA, and reside in the arc_mfu
	 * state.
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_mfu_evictable_data;
	/*
	 * Number of bytes consumed by ARC buffers that are eligible for
	 * eviction, of type ARC_BUFC_METADATA, and reside in the
	 * arc_mfu state.
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_mfu_evictable_metadata;
	/*
	 * Total number of bytes that *would have been* consumed by ARC
	 * buffers in the arc_mfu_ghost state. See the comment above
	 * arcstat_mru_ghost_size for more details.
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_mfu_ghost_size;
	/*
	 * Number of bytes that *would have been* consumed by ARC
	 * buffers that are eligible for eviction, of type
	 * ARC_BUFC_DATA, and linked off the arc_mfu_ghost state.
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_mfu_ghost_evictable_data;
	/*
	 * Number of bytes that *would have been* consumed by ARC
	 * buffers that are eligible for eviction, of type
	 * ARC_BUFC_METADATA, and linked off the arc_mru_ghost state.
	 * Not updated directly; only synced in arc_kstat_update.
	 */
	kstat_named_t arcstat_mfu_ghost_evictable_metadata;
	kstat_named_t arcstat_l2_hits;
	kstat_named_t arcstat_l2_misses;
	kstat_named_t arcstat_l2_feeds;
	kstat_named_t arcstat_l2_rw_clash;
	kstat_named_t arcstat_l2_read_bytes;
	kstat_named_t arcstat_l2_write_bytes;
	kstat_named_t arcstat_l2_writes_sent;
	kstat_named_t arcstat_l2_writes_done;
	kstat_named_t arcstat_l2_writes_error;
	kstat_named_t arcstat_l2_writes_lock_retry;
	kstat_named_t arcstat_l2_evict_lock_retry;
	kstat_named_t arcstat_l2_evict_reading;
	kstat_named_t arcstat_l2_evict_l1cached;
	kstat_named_t arcstat_l2_free_on_write;
	kstat_named_t arcstat_l2_abort_lowmem;
	kstat_named_t arcstat_l2_cksum_bad;
	kstat_named_t arcstat_l2_io_error;
	kstat_named_t arcstat_l2_lsize;
	kstat_named_t arcstat_l2_psize;
	/* Not updated directly; only synced in arc_kstat_update. */
	kstat_named_t arcstat_l2_hdr_size;
	/*
	 * Number of L2ARC log blocks written. These are used for restoring the
	 * L2ARC. Updated during writing of L2ARC log blocks.
	 */
	kstat_named_t arcstat_l2_log_blk_writes;
	/*
	 * Moving average of the aligned size of the L2ARC log blocks, in
	 * bytes. Updated during L2ARC rebuild and during writing of L2ARC
	 * log blocks.
	 */
	kstat_named_t arcstat_l2_log_blk_avg_asize;
	/* Aligned size of L2ARC log blocks on L2ARC devices. */
	kstat_named_t arcstat_l2_log_blk_asize;
	/* Number of L2ARC log blocks present on L2ARC devices. */
	kstat_named_t arcstat_l2_log_blk_count;
	/*
	 * Moving average of the aligned size of L2ARC restored data, in bytes,
	 * to the aligned size of their metadata in L2ARC, in bytes.
	 * Updated during L2ARC rebuild and during writing of L2ARC log blocks.
	 */
	kstat_named_t arcstat_l2_data_to_meta_ratio;
	/*
	 * Number of times the L2ARC rebuild was successful for an L2ARC device.
	 */
	kstat_named_t arcstat_l2_rebuild_success;
	/*
	 * Number of times the L2ARC rebuild failed because the device header
	 * was in an unsupported format or corrupted.
	 */
	kstat_named_t arcstat_l2_rebuild_abort_unsupported;
	/*
	 * Number of times the L2ARC rebuild failed because of IO errors
	 * while reading a log block.
	 */
	kstat_named_t arcstat_l2_rebuild_abort_io_errors;
	/*
	 * Number of times the L2ARC rebuild failed because of IO errors when
	 * reading the device header.
	 */
	kstat_named_t arcstat_l2_rebuild_abort_dh_errors;
	/*
	 * Number of L2ARC log blocks which failed to be restored due to
	 * checksum errors.
	 */
	kstat_named_t arcstat_l2_rebuild_abort_cksum_lb_errors;
	/*
	 * Number of times the L2ARC rebuild was aborted due to low system
	 * memory.
	 */
	kstat_named_t arcstat_l2_rebuild_abort_lowmem;
	/* Logical size of L2ARC restored data, in bytes. */
	kstat_named_t arcstat_l2_rebuild_size;
	/* Aligned size of L2ARC restored data, in bytes. */
	kstat_named_t arcstat_l2_rebuild_asize;
	/*
	 * Number of L2ARC log entries (buffers) that were successfully
	 * restored in ARC.
	 */
	kstat_named_t arcstat_l2_rebuild_bufs;
	/*
	 * Number of L2ARC log entries (buffers) already cached in ARC. These
	 * were not restored again.
	 */
	kstat_named_t arcstat_l2_rebuild_bufs_precached;
	/*
	 * Number of L2ARC log blocks that were restored successfully. Each
	 * log block may hold up to L2ARC_LOG_BLK_MAX_ENTRIES buffers.
	 */
	kstat_named_t arcstat_l2_rebuild_log_blks;
	kstat_named_t arcstat_memory_throttle_count;
	/* Not updated directly; only synced in arc_kstat_update. */
	kstat_named_t arcstat_meta_used;
	kstat_named_t arcstat_meta_limit;
	kstat_named_t arcstat_meta_max;
	kstat_named_t arcstat_meta_min;
	kstat_named_t arcstat_async_upgrade_sync;
	kstat_named_t arcstat_demand_hit_predictive_prefetch;
	kstat_named_t arcstat_demand_hit_prescient_prefetch;
} arc_stats_t;

#define	ARCSTAT(stat)	(arc_stats.stat.value.ui64)

#define	ARCSTAT_INCR(stat, val) \
	atomic_add_64(&arc_stats.stat.value.ui64, (val))

#define	ARCSTAT_BUMP(stat)	ARCSTAT_INCR(stat, 1)
#define	ARCSTAT_BUMPDOWN(stat)	ARCSTAT_INCR(stat, -1)

/*
 * There are several ARC variables that are critical to export as kstats --
 * but we don't want to have to grovel around in the kstat whenever we wish to
 * manipulate them.  For these variables, we therefore define them to be in
 * terms of the statistic variable.  This assures that we are not introducing
 * the possibility of inconsistency by having shadow copies of the variables,
 * while still allowing the code to be readable.
 */
#define	arc_p		ARCSTAT(arcstat_p)	/* target size of MRU */
#define	arc_c		ARCSTAT(arcstat_c)	/* target size of cache */
#define	arc_c_min	ARCSTAT(arcstat_c_min)	/* min target cache size */
#define	arc_c_max	ARCSTAT(arcstat_c_max)	/* max target cache size */
#define	arc_meta_limit	ARCSTAT(arcstat_meta_limit) /* max size for metadata */
#define	arc_meta_min	ARCSTAT(arcstat_meta_min) /* min size for metadata */
#define	arc_meta_max	ARCSTAT(arcstat_meta_max) /* max size of metadata */

/* compressed size of entire arc */
#define	arc_compressed_size	ARCSTAT(arcstat_compressed_size)
/* uncompressed size of entire arc */
#define	arc_uncompressed_size	ARCSTAT(arcstat_uncompressed_size)
/* number of bytes in the arc from arc_buf_t's */
#define	arc_overhead_size	ARCSTAT(arcstat_overhead_size)

extern arc_stats_t arc_stats;

/* used in zdb.c */
boolean_t l2arc_log_blkptr_valid(l2arc_dev_t *dev,
    const l2arc_log_blkptr_t *lbp);

#ifdef __cplusplus
}
#endif

#endif /* _SYS_ARC_IMPL_H */