Mercurial > illumos > illumos-gate

view usr/src/lib/scsi/plugins/ses/ses2/common/ses2.h @ 12632:2e5ce9dbe1f9

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
6943556 need to enumerate fanboard, fanmodule, powerboard, and powermodules in storage enclosure
author Hyon Kim <Hyon.Kim@Sun.COM>
date Wed, 16 Jun 2010 07:19:49 -0700
parents 60364f3f65c7
children
line wrap: on
line source

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved.
 */

#ifndef	_FRAMEWORK_SES2_H
#define	_FRAMEWORK_SES2_H

#ifdef	__cplusplus
extern "C" {
#endif

/*
 * Node properties
 */
typedef enum ses2_element_type {
	SES_ET_UNSPECIFIED = 0,
	SES_ET_DEVICE = 0x1,
	SES_ET_POWER_SUPPLY = 0x2,
	SES_ET_COOLING = 0x3,
	SES_ET_TEMPERATURE_SENSOR = 0x4,
	SES_ET_DOOR_LOCK = 0x5,
	SES_ET_AUDIBLE_ALARM = 0x6,
	SES_ET_ESC_ELECTRONICS = 0x7,
	SES_ET_SCC_ELECTRONICS = 0x8,
	SES_ET_NONVOLATILE_CACHE = 0x9,
	SES_ET_INVALID_OPERATION_REASON = 0xa,
	SES_ET_UPS = 0xb,
	SES_ET_DISPLAY = 0xc,
	SES_ET_KEY_PAD_ENTRY = 0xd,
	SES_ET_ENCLOSURE = 0xe,
	SES_ET_SCSI_PORT_XCVR = 0xf,
	SES_ET_LANGUAGE = 0x10,
	SES_ET_COMMUNICATION_PORT = 0x11,
	SES_ET_VOLTAGE_SENSOR = 0x12,
	SES_ET_CURRENT_SENSOR = 0x13,
	SES_ET_SCSI_TARGET_PORT = 0x14,
	SES_ET_SCSI_INITIATOR_PORT = 0x15,
	SES_ET_SIMPLE_SUBENCLOSURE = 0x16,
	SES_ET_ARRAY_DEVICE = 0x17,
	SES_ET_SAS_EXPANDER = 0x18,
	SES_ET_SAS_CONNECTOR = 0x19
} ses2_element_type_t;

#define	SES_PROP_STATUS_CODE		"ses-status-code"
typedef enum ses_element_status_code {
	SES_ESC_UNSUPPORTED = 0,
	SES_ESC_OK = 1,
	SES_ESC_CRITICAL = 2,
	SES_ESC_NONCRITICAL = 3,
	SES_ESC_UNRECOVERABLE = 4,
	SES_ESC_NOT_INSTALLED = 5,
	SES_ESC_UNKNOWN = 6,
	SES_ESC_UNAVAIL = 7,
	SES_ESC_NO_ACCESS = 8
} ses_element_status_code_t;

#define	SES_PROP_ELEMENT_CLASS_INDEX	"ses-element-class-index" /* U64 */
#define	SES_PROP_ELEMENT_INDEX		"ses-element-index"	/* U64 */
#define	SES_PROP_ELEMENT_ONLY_INDEX	"ses-element-only-index" /* U64 */
#define	SES_PROP_BAY_NUMBER		"ses-bay-number"	/* U64 */
#define	SES_PROP_PRDFAIL		"ses-failure-predicted"
#define	SES_PROP_SWAP			"ses-swapped"
#define	SES_PROP_DISABLED		"ses-disabled"
#define	SES_PROP_IDENT			"ses-identify"
#define	SES_PROP_WARN			"ses-warning"
#define	SES_PROP_FAIL			"ses-failed"
#define	SES_PROP_WARN_REQ		"ses-warning-indicator-requested"
#define	SES_PROP_FAIL_REQ		"ses-failure-indicator-requested"
#define	SES_PROP_REPORT			"ses-reported-via"
#define	SES_PROP_RMV			"ses-ready-to-remove"
#define	SES_PROP_OFF			"ses-off"
#define	SES_PROP_REQUESTED_ON		"ses-requested-on"
#define	SES_PROP_CLASS_DESCRIPTION	"ses-class-description"	/* S */
#define	SES_PROP_DESCRIPTION		"ses-description"	/* S */
#define	SES_PROP_HOT_SWAP		"ses-hot-swappable"

#define	SES_PROP_CRIT_OVER		"ses-critical-over"
#define	SES_PROP_CRIT_UNDER		"ses-critical-under"
#define	SES_PROP_WARN_OVER		"ses-warning-over"
#define	SES_PROP_WARN_UNDER		"ses-warning-under"

#define	SES_FC_PROP_NODE_NAME		"ses-fc-node-name"	/* U64 */
#define	SES_FC_PROP_LOOP_POS		"ses-fc-loop-position"	/* U64 */
#define	SES_FC_PROP_REQ_HARDADDR	"ses-fc-requested-hard-address"
#define	SES_FC_PROP_N_PORT_ID		"ses-fc-n_port-identifier" /* U64 */
#define	SES_FC_PROP_N_PORT_NAME		"ses-fc-n_port-name"	/* U64 */
#define	SES_FC_PROP_PORTS		"ses-fc-ports"		/* NVA */

#define	SES_SAS_PROP_DEVICE_TYPE	"ses-sas-device-type"	/* U64 */
/*
 * SAS2r11 7.8.2 Table 123
 */
typedef enum sas_device_type {
	SAS_DT_END_DEVICE = 0x01,
	SAS_DT_EXPANDER = 0x02,
	SAS_DT_LEGACY_EXPANDER = 0x3
} sas_device_type_t;

#define	SES_SAS_PROP_SMPI_PORT		"ses-sas-smp-initiator-port"
#define	SES_SAS_PROP_STPI_PORT		"ses-sas-stp-initiator-port"
#define	SES_SAS_PROP_SSPI_PORT		"ses-sas-ssp-initiator-port"
#define	SES_SAS_PROP_SATA_DEVICE	"ses-sas-sata-device"
#define	SES_SAS_PROP_SMPT_PORT		"ses-sas-smp-target-port"
#define	SES_SAS_PROP_STPT_PORT		"ses-sas-stp-target-port"
#define	SES_SAS_PROP_SSPT_PORT		"ses-sas-ssp-target-port"
#define	SES_SAS_PROP_ATT_ADDR		"ses-sas-attached-address" /* U64 */
#define	SES_SAS_PROP_ADDR		"ses-sas-address"	/* U64 */
#define	SES_SAS_PROP_PHY_ID		"ses-sas-phy-identifier" /* U64 */
#define	SES_SAS_PROP_PHYS		"ses-sas-phys"		/* NVA */
#define	SES_PROP_CE_IDX			"ses-connector-element-index" /* U64 */
#define	SES_PROP_OE_IDX			"ses-other-element-index" /* U64 */

#define	SES_PROP_THRESH_CRIT_HI		"ses-high-critical-threshold" /* U64 */
#define	SES_PROP_THRESH_WARN_HI		"ses-high-warning-threshold" /* U64 */
#define	SES_PROP_THRESH_CRIT_LO		"ses-low-critical-threshold" /* U64 */
#define	SES_PROP_THRESH_WARN_LO		"ses-low-warning-threshold" /* U64 */

/*
 * Audible Alarm properties
 */
#define	SES_ALARM_PROP_UNRECOV		"ses-indicating-unrecoverable"
#define	SES_ALARM_PROP_CRIT		"ses-indicating-critical"
#define	SES_ALARM_PROP_NONCRIT		"ses-indicating-noncritical"
#define	SES_ALARM_PROP_INFO		"ses-indicating-informational"
#define	SES_ALARM_PROP_REMIND		"ses-reminder-mode"
#define	SES_ALARM_PROP_MUTED		"ses-muted"
#define	SES_ALARM_PROP_RQST_MUTE	"ses-mute-requested"

/*
 * Nonvolatile Cache properties
 */
#define	SES_CACHE_PROP_SIZE		"ses-cache-size"	/* U64 */

/*
 * Cooling Element properties
 */
#define	SES_COOLING_PROP_FAN_SPEED	"ses-fan-speed"		/* U64 */
#define	SES_COOLING_PROP_SPEED_CODE	"ses-fan-speed-code"	/* U64 */
typedef enum ses_cooling_fan_speed {
	SES_COOLING_FAN_SPEED_STOPPED = 0,
	SES_COOLING_FAN_SPEED_LOWEST = 1,
	SES_COOLING_FAN_SPEED_LOWER = 2,
	SES_COOLING_FAN_SPEED_LOW = 3,
	SES_COOLING_FAN_SPEED_INTERMEDIATE = 4,
	SES_COOLING_FAN_SPEED_HIGH = 5,
	SES_COOLING_FAN_SPEED_HIGHER = 6,
	SES_COOLING_FAN_SPEED_HIGHEST = 7
} ses_cooling_fan_speed_t;

/*
 * Device/Array Device properties
 */
#define	SES_DEV_PROP_SLOT_ADDR		"ses-slot-address"	/* U64 */
#define	SES_DEV_PROP_PRDFAIL		"ses-failure-predicted"
#define	SES_DEV_PROP_READY_TO_INSERT	"ses-ready-to-insert"
#define	SES_DEV_PROP_ENC_BYP_A		"ses-enclosure-bypassed-a"
#define	SES_DEV_PROP_ENC_BYP_B		"ses-enclosure-bypassed-b"
#define	SES_DEV_PROP_DO_NOT_REMOVE	"ses-do-not-remove"
#define	SES_DEV_PROP_APP_BYP_A		"ses-app-client-bypassed-a"
#define	SES_DEV_PROP_APP_BYP_B		"ses-app-client-bypassed-b"
#define	SES_DEV_PROP_DEV_BYP_A		"ses-device-bypassed-a"
#define	SES_DEV_PROP_DEV_BYP_B		"ses-device-bypassed-b"
#define	SES_DEV_PROP_BYP_A		"ses-bypassed-a"
#define	SES_DEV_PROP_BYP_B		"ses-bypassed-b"
#define	SES_DEV_PROP_FAULT_RQSTD	"ses-fault-requested"
#define	SES_DEV_PROP_FAULT_SENSED	"ses-fault-sensed"
#define	SES_DEV_PROP_SAS_NOT_ALL_PHYS	"ses-sas-not-all-phys"

/* Control only */
#define	SES_DEV_PROP_REQ_MISSING	"ses-request-missing"
#define	SES_DEV_PROP_REQ_ACTIVE		"ses-request-activity"

#define	SES_AD_PROP_RR_ABORT		"ses-remap-rebuild-abort"
#define	SES_AD_PROP_REBUILD		"ses-remap-rebuild"
#define	SES_AD_PROP_IN_FAILED_ARRAY	"ses-in-failed-array"
#define	SES_AD_PROP_IN_CRIT_ARRAY	"ses-in-critical-array"
#define	SES_AD_PROP_CONS_CHK		"ses-consistency-check"
#define	SES_AD_PROP_HOT_SPARE		"ses-hot-spare"
#define	SES_AD_PROP_RSVD_DEVICE		"ses-reserved-device"
#define	SES_AD_PROP_OK			"ses-ok"

/*
 * Display Element properties
 */
#define	SES_DPY_PROP_CHAR		"ses-displayed-character" /* U16 */
#define	SES_DPY_PROP_MODE		"ses-display-mode"	/* U64 */
/*
 * SES-2r17 Table 96, 7.3.14
 */
typedef enum ses_display_mode_ctl {
	SES_DISPLAY_MC_NOCHG = 0,
	SES_DISPLAY_MC_ESP = 1,
	SES_DISPLAY_MC_SET = 2
} ses_display_mode_ctl_t;

typedef enum ses2_display_mode_status {
	SES_DISPLAY_MS_NOTSUP = 0,
	SES_DISPLAY_MS_ESP = 1,
	SES_DISPLAY_MS_SET = 2
} ses_display_mode_status_t;

/*
 * Current Sensor properties
 */
#define	SES_CS_PROP_CURRENT_MA		"ses-current"		/* I64 */

/*
 * Door Lock properties
 */
#define	SES_LOCK_PROP_UNLOCKED		"ses-unlocked"

/*
 * SCSI Initiator or Target Port properties
 */
#define	SES_ITP_PROP_ENABLED		"ses-enabled"

/*
 * Language Module properties
 */
#define	SES_LANG_PROP_LANGCODE		"ses-language-code"	/* U64 */

/*
 * SCSI Port/Transceiver properties
 */
#define	SES_PX_PROP_XMIT_FAIL		"ses-transmitter-failure"
#define	SES_PX_PROP_LOL			"ses-loss-of-link"

/*
 * Power Supply properties
 */
#define	SES_PSU_PROP_DC_OVER_CURRENT	"ses-dc-over-current"
#define	SES_PSU_PROP_DC_UNDER_VOLTAGE	"ses-dc-under-voltage"
#define	SES_PSU_PROP_DC_OVER_VOLTAGE	"ses-dc-over-voltage"
#define	SES_PSU_PROP_DC_FAIL		"ses-dc-fail"
#define	SES_PSU_PROP_AC_FAIL		"ses-ac-fail"
#define	SES_PSU_PROP_TEMP_WARN		"ses-temperature-warning" /* I64 */
#define	SES_PSU_PROP_OVERTEMP_FAIL	"ses-overtemperature-failure"

/*
 * SAS Expander properties
 */
#define	SES_EXP_PROP_SAS_ADDR		"ses-expander-sas-address" /* U64 */

/*
 * SAS Connector properties
 */
#define	SES_SC_PROP_PHYSICAL_LINK	"ses-sas-physical-link"	/* U64 */
#define	SES_SC_PROP_CONNECTOR_TYPE	"ses-sas-connector-type" /* U64 */
/*
 * SES2r17 Table 122, 7.3.26
 */
typedef enum ses_sasconn_type {
	SES_SASCONN_T_UNKNOWN = 0,
	SES_SASCONN_T_SFF_8470 = 0x1,
	SES_SASCONN_T_SFF_8088 = 0x2,
	SES_SASCONN_T_VENDOR_EXT = 0xf,
	SES_SASCONN_T_SFF_8484 = 0x10,
	SES_SASCONN_T_SFF_8087 = 0x11,
	SES_SASCONN_T_SFF_8482_R = 0x20,
	SES_SASCONN_T_SATA_HOST = 0x21,
	SES_SASCONN_T_SFF_8482_P = 0x22,
	SES_SASCONN_T_SATA_DEV = 0x23,
	SES_SASCONN_T_VIRTUAL = 0x2f,
	SES_SASCONN_T_VENDOR_INT = 0x3f,
	SES_SASCONN_T_VENDOR_70 = 0x70,
	SES_SASCONN_T_VENDOR_71 = 0x71,
	SES_SASCONN_T_VENDOR_72 = 0x72,
	SES_SASCONN_T_VENDOR_73 = 0x73,
	SES_SASCONN_T_VENDOR_74 = 0x74,
	SES_SASCONN_T_VENDOR_75 = 0x75,
	SES_SASCONN_T_VENDOR_76 = 0x76,
	SES_SASCONN_T_VENDOR_77 = 0x77,
	SES_SASCONN_T_VENDOR_78 = 0x78,
	SES_SASCONN_T_VENDOR_79 = 0x79,
	SES_SASCONN_T_VENDOR_7A = 0x7a,
	SES_SASCONN_T_VENDOR_7B = 0x7b,
	SES_SASCONN_T_VENDOR_7C = 0x7c,
	SES_SASCONN_T_VENDOR_7D = 0x7d,
	SES_SASCONN_T_VENDOR_7E = 0x7e,
	SES_SASCONN_T_VENDOR_7F = 0x7f
} ses_sasconn_type_t;

/*
 * Simple Subenclosure properties
 */
#define	SES_SS_PROP_SHORT_STATUS	"ses-short-status"	/* U64 */

/*
 * Temperature Sensor properties
 */
#define	SES_TEMP_PROP_TEMP		"ses-temperature"	/* I64 */

/*
 * Uninterruptible Power Supply properties
 */
#define	SES_UPS_PROP_TIMELEFT		"ses-battery-time-remaining" /* U64 */
#define	SES_UPS_PROP_INTF_FAIL		"ses-interface-failure"
#define	SES_UPS_PROP_WARN		"ses-low-battery-warning"
#define	SES_UPS_PROP_UPS_FAIL		"ses-ups-failure"
#define	SES_UPS_PROP_DC_FAIL		"ses-dc-failure"
#define	SES_UPS_PROP_AC_FAIL		"ses-ac-failure"
#define	SES_UPS_PROP_AC_QUAL		"ses-ac-quality-exception"
#define	SES_UPS_PROP_AC_HI		"ses-ac-overvoltage-exception"
#define	SES_UPS_PROP_AC_LO		"ses-ac-undervoltage-exception"
#define	SES_UPS_PROP_BPF		"ses-battery-failure-predicted"
#define	SES_UPS_PROP_BATT_FAIL		"ses-battery-failure"

/*
 * Voltage Sensor properties
 */
#define	SES_VS_PROP_VOLTAGE_MV		"ses-voltage"		/* I64 */

/*
 * Enclosure Services Controller properties (Control only)
 */
#define	SES_ESC_PROP_SELECT		"ses-select-element"

/*
 * Primary/Subenclosure properties
 */
#define	SES_EN_PROP_EID			"ses-enclosure-id"	/* U64 */
#define	SES_EN_PROP_ESPID		"ses-enclosure-service-proc-id"
#define	SES_EN_PROP_NESP		"ses-enclosure-service-proc-count"
#define	SES_EN_PROP_LID			"ses-logical-id"		/* NV */
#define	SES_EN_PROP_VID			"ses-vendor-id"		/* S */
#define	SES_EN_PROP_PID			"ses-product-id"	/* S */
#define	SES_EN_PROP_REV			"ses-product-revision"	/* S */
#define	SES_EN_PROP_VS			"ses-product-vendor-specific" /* BA */

#define	SES_EN_PROP_UNRECOV		"ses-status-unrecoverable"
#define	SES_EN_PROP_CRIT		"ses-status-critical"
#define	SES_EN_PROP_NONCRIT		"ses-status-noncritical"
#define	SES_EN_PROP_INFO		"ses-status-informational"
#define	SES_EN_PROP_INVOP		"ses-status-invalid-operation"
#define	SES_EN_PROP_HELP		"ses-help-text"		/* S */
#define	SES_EN_PROP_STRING		"ses-string-in-data"	/* BA */
#define	SES_EN_PROP_SHORT		"ses-short-status"	/* U64 */
#define	SES_EN_PROP_UCODE		"ses-microcode-dl-status" /* U64 */
typedef enum ses2_dl_ucode_status {
	SES2_DLUCODE_S_NOP = 0,
	SES2_DLUCODE_S_INPROGRESS = 0x1,
	SES2_DLUCODE_S_SAVING = 0x2,
	SES2_DLUCODE_S_INTERIM_3 = 0x3,
	SES2_DLUCODE_S_INTERIM_4 = 0x4,
	SES2_DLUCODE_S_INTERIM_5 = 0x5,
	SES2_DLUCODE_S_INTERIM_6 = 0x6,
	SES2_DLUCODE_S_INTERIM_7 = 0x7,
	SES2_DLUCODE_S_INTERIM_8 = 0x8,
	SES2_DLUCODE_S_INTERIM_9 = 0x9,
	SES2_DLUCODE_S_INTERIM_A = 0xa,
	SES2_DLUCODE_S_INTERIM_B = 0xb,
	SES2_DLUCODE_S_INTERIM_C = 0xc,
	SES2_DLUCODE_S_INTERIM_D = 0xd,
	SES2_DLUCODE_S_INTERIM_E = 0xe,
	SES2_DLUCODE_S_INTERIM_F = 0xf,
	SES2_DLUCODE_S_COMPLETE_NOW = 0x10,
	SES2_DLUCODE_S_COMPLETE_AT_RESET = 0x11,
	SES2_DLUCODE_S_COMPLETE_AT_POWERON = 0x12,
	SES2_DLUCODE_S_VENDOR_70 = 0x70,
	SES2_DLUCODE_S_VENDOR_71 = 0x71,
	SES2_DLUCODE_S_VENDOR_72 = 0x72,
	SES2_DLUCODE_S_VENDOR_73 = 0x73,
	SES2_DLUCODE_S_VENDOR_74 = 0x74,
	SES2_DLUCODE_S_VENDOR_75 = 0x75,
	SES2_DLUCODE_S_VENDOR_76 = 0x76,
	SES2_DLUCODE_S_VENDOR_77 = 0x77,
	SES2_DLUCODE_S_VENDOR_78 = 0x78,
	SES2_DLUCODE_S_VENDOR_79 = 0x79,
	SES2_DLUCODE_S_VENDOR_7A = 0x7a,
	SES2_DLUCODE_S_VENDOR_7B = 0x7b,
	SES2_DLUCODE_S_VENDOR_7C = 0x7c,
	SES2_DLUCODE_S_VENDOR_7D = 0x7d,
	SES2_DLUCODE_S_VENDOR_7E = 0x7e,
	SES2_DLUCODE_S_VENDOR_7F = 0x7f,
	SES2_DLUCODE_S_PAGE_ERR = 0x80,
	SES2_DLUCODE_S_IMAGE_ERR = 0x81,
	SES2_DLUCODE_S_TIMEOUT = 0x82,
	SES2_DLUCODE_S_INTERNAL_NEEDIMAGE = 0x83,
	SES2_DLUCODE_S_INTERNAL_SAFE = 0x84,
	SES2_DLUCODE_S_VENDOR_ERR_F0 = 0xf0,
	SES2_DLUCODE_S_VENDOR_ERR_F1 = 0xf1,
	SES2_DLUCODE_S_VENDOR_ERR_F2 = 0xf2,
	SES2_DLUCODE_S_VENDOR_ERR_F3 = 0xf3,
	SES2_DLUCODE_S_VENDOR_ERR_F4 = 0xf4,
	SES2_DLUCODE_S_VENDOR_ERR_F5 = 0xf5,
	SES2_DLUCODE_S_VENDOR_ERR_F6 = 0xf6,
	SES2_DLUCODE_S_VENDOR_ERR_F7 = 0xf7,
	SES2_DLUCODE_S_VENDOR_ERR_F8 = 0xf8,
	SES2_DLUCODE_S_VENDOR_ERR_F9 = 0xf9,
	SES2_DLUCODE_S_VENDOR_ERR_FA = 0xfa,
	SES2_DLUCODE_S_VENDOR_ERR_FB = 0xfb,
	SES2_DLUCODE_S_VENDOR_ERR_FC = 0xfc,
	SES2_DLUCODE_S_VENDOR_ERR_FD = 0xfd,
	SES2_DLUCODE_S_VENDOR_ERR_FE = 0xfe,
	SES2_DLUCODE_S_VENDOR_ERR_FF = 0xff
} ses2_dl_ucode_status_t;

typedef enum ses_dl_ucode_mode {
	SES_DLUCODE_M_WITH_OFFS = 6,
	SES_DLUCODE_M_WITH_OFFS_SAVE = 7
} ses_dl_ucode_mode_t;

#define	SES_EN_PROP_UCODE_A		"ses-microcode-dl-addl-status" /* U64 */
#define	SES_EN_PROP_UCODE_SZ		"ses-microcode-maximum-size" /* U64 */
#define	SES_EN_PROP_UCODE_BUF		"ses-microcode-buffer-id" /* U64 */
#define	SES_EN_PROP_UCODE_OFF		"ses-microcode-buffer-offset" /* U64 */

#define	SES_EN_PROP_NICK		"ses-nickname"		/* S */
#define	SES_EN_PROP_NICK_STATUS		"ses-nickname-status"	/* U64 */
typedef enum ses_subnick_status {
	SES_SNS_NO_ERROR = 0x0,
	SES_SNS_ERR_PAGE = 0x80,
	SES_SNS_ERR_INT_NICKLOST = 0x81,
	SES_SNS_ERR_INT_PRESERVED = 0x82
} ses_subnick_status_t;

#define	SES_EN_PROP_NICK_ADDL_STATUS	"ses-nickname-additional-status"
#define	SES_EN_PROP_NICK_LANG		"ses-nickname-language"	/* U64 */

#define	SES_EN_PROP_POWER_DELAY		"ses-power-cycle-delay"	/* U64 */
#define	SES_EN_PROP_POWER_DURATION	"ses-power-cycle-duration" /* U64 */
#define	SES_EN_PROP_POWER_REQUEST	"ses-power-cycle-request" /* U64 */

typedef enum ses_power_delay {
	SES_PDL_NONE = 0x0,
	SES_PDL_IMMEDIATE = 0x3f
} ses_power_delay_t;

typedef enum ses_power_duration {
	SES_PDR_NONE = 0x0,
	SES_PDR_MANUAL = 0x3f
} ses_power_duration_t;

typedef enum ses_power_request {
	SES_PRQ_NONE = 0x0,
	SES_PRQ_SET = 0x1,
	SES_PRQ_CANCEL = 0x2
} ses_power_request_t;

/*
 * IEEE logical IDs (for SES_EN_PROP_LID)
 */
#define	SPC3_NAA_INT			"naa-id-integer"	/* U64 */
#define	SPC3_NAA_ID_TYPE		"naa-id-type"		/* U64 */
#define	SPC3_NAA_COMPANY_ID		"naa-company-id"	/* U64 */
#define	SPC3_NAA_VS_A			"naa-vendor-specific-a"	/* U64 */
#define	SPC3_NAA_VS_B			"naa-vendor-specific-b"	/* U64 */

/*
 * SES-2 Diagnostic page codes (Table 5, 6.1.1).  The set of exported pages
 * constitutes an inter-plugin interface and is therefore part of the public
 * header file.
 */
typedef enum ses2_diag_page {
	SES2_DIAGPAGE_SUPPORTED_PAGES = 0x00,
	SES2_DIAGPAGE_CONFIG = 0x01,
	SES2_DIAGPAGE_ENCLOSURE_CTL_STATUS = 0x02,
	SES2_DIAGPAGE_HELP_TEXT = 0x03,
	SES2_DIAGPAGE_STRING_IO = 0x04,
	SES2_DIAGPAGE_THRESHOLD_IO = 0x05,
	SES2_DIAGPAGE_ELEMENT_DESC = 0x07,
	SES2_DIAGPAGE_SHORT_STATUS = 0x08,
	SES2_DIAGPAGE_ENCLOSURE_BUSY = 0x09,
	SES2_DIAGPAGE_ADDL_ELEM_STATUS = 0x0a,
	SES2_DIAGPAGE_SUBENCLOSURE_HELP_TEXT = 0x0b,
	SES2_DIAGPAGE_SUBENCLOSURE_STRING_IO = 0x0c,
	SES2_DIAGPAGE_SUPPORTED_SES_PAGES = 0x0d,
	SES2_DIAGPAGE_DL_MICROCODE_CTL_STATUS = 0x0e,
	SES2_DIAGPAGE_SUBENCLOSURE_NICKNAME_CTL_STATUS = 0x0f,
	SES2_DIAGPAGE_VENDOR_0 = 0x10,
	SES2_DIAGPAGE_VENDOR_1 = 0x11,
	SES2_DIAGPAGE_VENDOR_2 = 0x12,
	SES2_DIAGPAGE_VENDOR_3 = 0x13,
	SES2_DIAGPAGE_VENDOR_4 = 0x14,
	SES2_DIAGPAGE_VENDOR_5 = 0x15,
	SES2_DIAGPAGE_VENDOR_6 = 0x16,
	SES2_DIAGPAGE_VENDOR_7 = 0x17,
	SES2_DIAGPAGE_VENDOR_8 = 0x18,
	SES2_DIAGPAGE_VENDOR_9 = 0x19,
	SES2_DIAGPAGE_VENDOR_A = 0x1a,
	SES2_DIAGPAGE_VENDOR_B = 0x1b,
	SES2_DIAGPAGE_VENDOR_C = 0x1c,
	SES2_DIAGPAGE_VENDOR_D = 0x1d,
	SES2_DIAGPAGE_VENDOR_E = 0x1e,
	SES2_DIAGPAGE_VENDOR_F = 0x1f
} ses2_diag_page_t;

#define	SES_CTL_OP_SETPROP		"ses-ctl-setprop"
#define	SES_CTL_OP_DL_UCODE		"ses-ctl-dl-ucode"

#define	SES_CTL_PROP_UCODE_DATA		"ses-ctl-ucode-data"
#define	SES_CTL_PROP_UCODE_BUFID	"ses-ctl-ucode-bufid"
#define	SES_CTL_PROP_UCODE_MODE		"ses-ctl-ucode-mode"
#define	SES_CTL_PROP_UCODE_DATA_LEN	"ses-ctl-ucode-data-length" /* U64 */

#ifdef	__cplusplus
}
#endif

#endif	/* _FRAMEWORK_SES2_H */